AI Receptionist Onboarding

From yes to answering real calls in 48 hours

Here's exactly what happens between saying yes and your AI receptionist picking up real inbound calls — three things we need from you, what we build, how we test it, and what day three looks like.

What We Need From You: Three Things, Nothing More

Getting your AI receptionist live takes three pieces of information from you — most owners pull them together in under 20 minutes.

Call forwarding activation. You redirect your business number to us. On most UK mobile networks this takes under two minutes using a short code. No new phone number, no hardware, nothing to install.

Calendar access. We connect to whatever you already use — Google Calendar, Outlook, or your existing booking system. If you don't use a calendar yet, we set one up and show you how to check it.

A service list and your area. Tell us what jobs you take — boiler services, emergency callouts, full rewires, drain unblocking, whatever applies to your trade — which postcodes you cover, and your standard call-out rate. That's enough to build a qualifying script specific to your work.

After you send those three things, we do the rest. No lengthy forms, no two-hour onboarding call, no dashboard to log into.

  • Call forwarding: active in under two minutes on most UK networks
  • Calendar: Google Calendar, Outlook, or we set one up for you
  • Service list: job types, postcodes you cover, your standard call-out rate

Hours 1 to 8: System Configuration and Trade-Specific Setup

The first eight hours are when we build the backbone of your AI receptionist — the logic that decides how every inbound call gets handled.

Call routing logic. We configure which calls go straight to booking, which get a qualifying question first, and which get escalated to your mobile immediately. A burst pipe at 2am is not the same as a boiler service enquiry on a Tuesday morning, and the system treats them differently.

Trade-specific qualifying questions. A plumber's script is not an electrician's script. We build your qualifier around your specific trade. For heating engineers, that might be: "Is the boiler completely dead or is it losing pressure?" For roofers: "Is there active water ingress right now?" The AI asks the right questions to separate a £300 emergency callout from a quote request that can wait until Monday.

Emergency escalation rules. You set the threshold. If a caller describes a gas leak, a live wire, or structural damage, the system escalates immediately — it texts your mobile with the caller's details and the reason for escalation, so you can decide within seconds whether to call back, even if you're mid-job.

After-hours handling. We configure separate behaviour for calls outside your working hours. The AI still qualifies the caller, still takes a booking if the job can wait, and still escalates genuine emergencies directly to your mobile.

Hours 8 to 24: Script Refinement and Calendar Integration

By hour eight, the core system is built. Hours eight to twenty-four are about connecting it to your calendar and tightening everything before testing.

Calendar integration. We connect the AI to your existing calendar. When a caller books a job, the appointment lands directly in Google Calendar or Outlook with the trade, the address, the caller's number, and any notes the AI captured. You don't confirm anything — it's already in there.

Business-hours and after-hours routing confirmation. We pin down the exact hours you work, any days you don't take calls, and what after-hours means for your business. If you cover emergency callouts on weekends at a higher rate, we configure that rate into the script so the AI quotes it correctly.

Script testing pass. A member of our team reads every line of the qualifying script and checks it sounds like a real person working in your trade — not a corporate call centre. We adjust phrasing, check that postcode questions are clear, and make sure emergency questions are unambiguous.

Trade-specific customisations. For Gas Safe registered engineers, we include the option to ask whether the caller needs a gas safety certificate. For electricians registered with NICEIC or NAPIT, we can reference your accreditation when the AI introduces itself to callers.

Hours 24 to 48: Quality Testing and Live Simulation

Before anything goes live, we run the system through a full set of test calls covering four scenario types.

Standard booking call. Non-emergency, within your service area. The AI qualifies, books, and the appointment appears in your calendar.

Out-of-service-area call. The AI declines politely, does not book, and does not waste the caller's time.

After-hours emergency call. Escalation fires to your mobile with the caller's name, number, and the reason.

Ambiguous call. The caller isn't sure what they need. The AI asks clarifying questions and handles it cleanly rather than dumping the call to voicemail.

Each test call is scored against a QA checklist: did the AI capture the caller's name, number, and postcode? Did it ask the right qualifying questions? Did it book correctly? Did escalation fire when it should?

After testing, we send you a short summary with recordings from two or three scenarios. You listen, and nothing goes live until you sign off. If you want a word changed or a question reordered, we make the adjustment and retest before go-live.

You can read more about what we stand behind on our service guarantee page.

  • Standard booking — non-emergency, in-area call handled to calendar
  • Out-of-service-area — AI declines politely without booking
  • After-hours emergency — escalation texts your mobile immediately
  • Ambiguous call — AI asks clarifying questions and resolves without voicemail

The Live Handoff: What Day 3 Looks Like for the Contractor

Day three is the quietest day of the whole process — for you, at least.

Your call forwarding is already active. When your business number rings, the AI answers. You're under a boiler or on a roof. The phone rings and you don't pick it up — and that's entirely the point.

The AI qualifies the caller, books the job, and you get a text: "New booking: John, boiler no hot water, 14 Maple Street, Thursday 10am." The job is already in your calendar. No voicemail to listen to, no callback to make, no job lost to a competitor who happened to pick up.

For most owners, the first real booking through the system lands within a few hours of go-live. The setup is done. The AI just runs.

The First 30 Days: Monitoring, Optimisation, and Support

Going live is not the end of our involvement — it's when the useful work starts.

Weekly call review. In the first 30 days we review a sample of real calls every week. We're looking for calls where the AI stumbled on an unusual request, callers who hung up before booking, and any escalations that fired incorrectly.

Script adjustments from real data. Real callers say things test calls don't anticipate. If three callers in the first fortnight ask something the AI doesn't handle well, we update the response. You don't ask us to do it — we spot it in the review and do it automatically.

Escalation review. We check every escalation that fired in the first 30 days: was it a genuine emergency, or did the AI escalate something it should have handled itself? We tighten the thresholds based on what we find.

Direct support access. If anything breaks or sounds wrong, you text or email us directly. You don't troubleshoot a settings page. You tell us what happened and we fix it. For critical issues — AI not answering calls — response time is same-day.

After 30 days, we move to monthly reviews as the system stabilises.

Frequently asked

What if I use a landline rather than a mobile?

Landlines work fine. We set up call forwarding from your landline to the AI system — the process is slightly different depending on your provider, but we walk you through it. Most UK landline providers support forwarding via a short code or through your online account. You do not need to change your number or port anything across.

Can you work with my existing scheduling software?

We integrate directly with Google Calendar and Outlook. If you use a trade-specific scheduling tool, tell us on the initial call and we'll confirm before you sign up whether direct integration is possible or whether we bridge it via a connected calendar. There are no surprises on go-live day.

What if I want to change the script after go-live?

Text or email us with the change you want. Script updates — a new job type, a different qualifying question, updated postcodes — are typically live within one working day. There is no self-service portal to navigate and no additional charge for routine script changes within your plan.

Who do I contact if something breaks?

You contact us directly — there is no support ticket queue to navigate. Text or email the number and address we give you at go-live. For critical issues such as the AI failing to answer calls, we aim to resolve the problem the same day. We also monitor call volume proactively, so we often identify a problem before you do.

Do I need to do anything on day three to activate the AI?

No. By the time we reach go-live, call forwarding is already configured and tested. The AI is active the moment we confirm go-live with you. The next inbound call to your business number is answered automatically. You do not press a button or toggle a setting.

Your next inbound call is either answered or lost

Book a free 20-minute call. We'll confirm whether we're the right fit for your trade and your calendar setup, and give you an exact price.